product

Phone:0755-27620900

Email:sam888@china-sam.com

Home > Products > Stencil Cleaning

SM-8150 Water-based Stencil Cleaning Machine

Water-based cleaner machine is a water-based cleaning process design  cleaning equipment. Fully automatic finish cleaning- rinsing- drying  process, the main application is stencil, plastic mesh, scraper, the furnace jig cleaning, etc.

  • Description
  • Detailed
  • Gallery
  • Support
  • Features :

     

    1.Dedicated to water-based cleaning fluid to clean stencils, PCBA, etc. Process with high pressure spray system.


    2.Double liquid tank, equipped with heating system, implementation needs cleaning and rinsing.


    3.Technological process: cleaning chemical isolation - rinse (open loop/closed loop) - dry


    4.Preparation of advanced automatic touch screen operating software, program files stored, used and its simplicity


    5.Counting system function, can automatically accumulated cleaning sheet number and loop filter


    6.Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status


    7.Window cleaning pressure can be adjusted independently, process is more wide, solve the SMT stencil tension in the process of high pressure cleaning problem.


    8.Drift lotion resistivity monitoring, ensure the cleanliness, the resistivity can be set up, meet the demand of different halftone technique Max 740mm(L) ×740mm(W) × 40mm(H) 


    9.Consumables monitor alarm filter service life

    10.Integral stainless steel fuselage, strong and durable, resistant to acid, alkali cleaning fluid, etc  


    11. Floating lotion emissions filtering, more environmental protection


    12.Effect of high pressure fan + hot air drying, drying more quickly and thoroughly


    13. Lower running cost, every time only 12 l liquid cleaning, clean end use compressed air recycling pipeline and pump more than residual liquid, liquid consumption can reduce 50%.

  •  Specification 


    Apply screen size

    Max 740mm(L) ×740mm(W) × 40mm(H)


    Cleaning fluid capacity

    50L*2PCS(max)


    Best liquid usage

    40L*2PCS


    Clean and risn method

    Left-right moving high pressure liquid spray cleaning


    Drying method

    High pressure hot air(Optional super models)


    Clean time

    2-5 Min


    Cleaning fluid separation time

    40S 


    Rinse time

    2-5 Min


    Rinse times

    1-99times (adjustable)


    Drying time

    2-5Min


    Cleaning liquid recycling

    1μm (Micro filter: rosin, solder paste, flux and pollutants)


    Rinse liquid emission filter

    5μm (Micro filter: rosin, solder paste, flux and pollutants)


    Liquid heating temperature

    room temp~60°C


    noise

    Less than 50 decibels


    Range of resistivity tester

    0~18MΩ


    DI water supply

    30~60L/min


    DI water pressure

    ≤0.4Mpa


    DI water Gateway connecting pipe

    1 Inch

    Air supply

     0.45Mpa ~0.7Mpa


    Power supply

    AC380V 50HZ 65A


    Total power

    33KW


    Net weight

    500Kg


    Air out size

    Φ124(W)×30mm(H)


    Dimension

    1600mm(L) ×1160mm(W) ×1850mm(H)


  • The application fields :


Consultation

Contact Us

Add: 1 Floor, 13 Building, HongFa Industrial Park, Tangtou Road 91, Shiyan Town, Baoan District, Shenzhen, China

Tel:0755-27620900

Mail:sam888@china-sam.com