CH  |  EN

product/产品中心

Phone: 0755-27620900

Mail: sales@china-sam.com

Home > products > SMT Cleaning Machine > Stencil Cleaning > SM-8150 Water-based Stencil Cleaning Machine

SM-8150 Water-based Stencil Cleaning Machine

The water-based stencil cleaning machine is mainly aimed at SMT stencil cleaning in the electronic industry using water-based cleaning liquid.

 

The machine consists of cleaning system, rinsing system, drying system and filtering system. The machine uses electricity and gas as its energy source, and manually puts the stencil into the cleaning room. After setting the cleaning, rinsing, drying and other related parameters by the touch screen, press the start button, and the mesh board will be automatically cleaned, rinsed and dried.

 

The machine is very convenient for operators to clean the stencil, greatly improving production efficiency and quality. The equipment uses water-based liquid or DI water as cleaning agent, without any potential safety hazards and harmless to personnel.

  • Description
  • Detailed
  • Gallery
  • Support
  • ◆High Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid

    ◆Double liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying

    ◆Cleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.

    ◆Preparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use

    ◆The counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters

    ◆Liquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time

    ◆Integral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc   

    ◆Rinse water can be filtered by ion to achieve long time zero discharge

    ◆High-pressure fan + hot air drying, drying effect faster and thorough

    ◆Lower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%

  • Dimension(mm)                    

    L1600*W1160*H1920

    Applicable stencil size (mm)

    L740 *W740 * H40(max)
    Special size to be customized

    Power supply

    AC380V 50HZ

    Total power

    33KW

    Gas source   

    0.4~0.7Mpa

    Source of water

    0.2~0.4Mpa

    Exhaust port

    Ø125

    Cleaning/Rinsing liquid tank volume

    60L*2PCS(max)

    Optimum liquid usage 

    40L*2PCS

    Cleaning fluid isolation time

    40S

    Clean time

    3~8Min

    Rinse time      

    3~10Min

    Dry time

    3~10Min

    Cleaning and rinsing methods

    Left and right movable high pressure

    liquid spray cleaning

    Drying method

    High pressure hot air shearing

    (optional super type)

    times of rinsing

    1-99 times (settable)

    Cleaning liquid recovery filtration

    Filtration of 5 microns

    (filtering microorganisms: red gum and contaminants)

    Rinsing liquid discharge filtration

    Filtration of 5 microns

     (filtering microorganisms: red gum and contaminants)

    Liquid heating temperature

    Room Temperature to 60 ℃

    DI Water Supply

    30~60L/min

    DI Water Pressure

    0.2--0.4Mpa

    DI Water Access Connection Pipeline

    3/4 inches

    noise

    Less than 60 decibels

    Net Machine Weight

    500Kg

Welcome To Consult

Contact Us

Add: 1 Floor, 13 Building, HongFa Industrial Park, Tangtou Road 91, Shiyan Town, Baoan District, Shenzhen, China

Tel:0755-27620900

Mail:sam888@china-sam.com